Publications

ISKENDER YILGOR

HOME

BIOGRAPHY

PUBLICATIONS

RESEARCH

TEACHING

Publications

91. “Understanding the influence of hydrogen bonding and diisocyanate symmetry on the morphology and properties of segmented polyurethanes and polyureas: Computational and experimental study”

Selim Sami, Erol Yildirim, Mine Yurtsever, Ersin Yurtsever, Emel Yilgor, Iskender Yilgor and Garth L. Wilkes

Polymer, 55(18), 4563-4576 (2014).

90. “Silicone containing copolymers: Synthesis, characterization and applications”

Emel Yilgor and Iskender Yilgor

Progress in Polymer Science, 39(6), 1165-1195 (2014).

89. “Hydrophilization of silicone-urea copolymer surfaces by UV/Ozone: Influence of PDMS molecular weight on surface oxidation and hydrophobic recovery”

S. Bilgin, M. Isik, E. Yilgor, I. Yilgor

Polymer, 54(25), 6665-6675 (2013).

88. “Polyurethaneurea-Silica Nanocomposites: Preparation and Investigation of the Structure-Property Behavior”,

Ozge Malay, Oguzhan Oguz, Cagla Kosak, Emel Yilgor, Iskender Yilgor, Yusuf Z. Menceloglu,

Polymer, 54(20), 5310-5320 (2013).

87. “Effects of solvent on TEOS hydrolysis kinetics and silica particle size under basic conditions”

Ozge Malay, Iskender Yilgor and Yusuf Z. Menceloglu

J Sol-Gel Science and Technology, 67(2), 351-361, (2013).

86. “Two new polymers as candidates of rhinoplasty allografts; An experimental study in a rabbit model”

Cemal Cingi, Aylin Calli, Nagehan Erdogmus, Caglar Calli, İskender Yilgor, Emel Yilgor, Cengiz Bal,

Annals of Otology Rhinology Larngology, 122(7), 474-479 (2013)

85. “Tunable wetting of polymer surfaces”

I. Yilgor, S. Bilgin, M. Isik and E. Yilgor

Langmuir, 28(41), 14808-14814 (2012)

84. “The Effect of Varying Soft and Hard Segment Length on the Structure-Property Relationships of Segmented Polyurethanes Based on a Linear Symmetric Diisocyanate, 1,4-Butanediol and PTMO Soft Segments”

D. B. Klinedinst, I. Yilgör, E. Yilgör, M. Zhang, G. L. Wilkes

Polymer, 53(23), 5358-5366 (2012)

83. “Effect of soft segment molecular weight on tensile properties of poly(propylene

oxide) based polyurethaneureas”

S. P. Ertem, E. Yilgör, C. Kosak, I. Yilgör, M. Zhang, G. L. Wilkes,

Polymer 53(21), 4614-4622 (2012)

82. “Microphase separation via spinodal-like decomposition in hexamethylenediisocyanate (HDI)-polyurea”

A. S. Kulkarni, G. Beaucage, G. L. Wilkes, S. Das and I. Yilgor

J. Inorganic and Organometallic Polymers, 22(3), 624-628 (2012)

81. “Multiscale modeling of the morphology and properties of segmented silicone-urea copolymers”

Erol Yildirim, Mine Yurtsever, Ersin Yurtsever, Iskender Yilgor, Emel Yilgor

J. Inorganic and Organometallic Polymers, 22(3), 604-616 (2012)

80. “Effect of UV/Ozone irradiation on the surface properties of electrospun webs and films prepared from polydimethylsiloxane-urea copolymers”

Emel Yilgor, Orkun Kaymakci, Mehmet Isik, Sevilay Bilgin and Iskender Yilgor

Applied Surface Science, 258(19), 4246-4253 (2012)

79. “Facile preparation of superhydrophobic polymer surfaces”

Iskender Yilgor, Sevilay Bilgin, Mehmet Isik ve Emel Yilgor

Polymer, 53(6), 1180-1188 (2012)

78. “Fumed silica filled poly(dimethylsiloxane-urea) segmented copolymers: Preparation and properties”

Emel Yilgor, Tugba Eynur, Cagla Kosak, Sevilay Bilgin, Iskender Yilgor, Ozge Malay, Yusuf Menceloglu and Garth L. Wilkes

Polymer, 52(19), 4189-4198 (2011).

77. “Influence of soft segment molecular weight on the mechanical hysteresis and set behavior of silicone-urea copolymers with low hard segment contents”

Iskender Yilgor, Tugba Eynur, Sevilay Bilgin, Emel Yilgor and Garth L. Wilkes

Polymer, 52(2), 266-274 (2011).

76. “Novel Synthetic Approach for the Preparation of Polyurethaneurea Elastomers”

E. Yilgor, M. Isik and I. Yilgor

Macromolecules, 43(20), 8588 – 8593 (2010).

75. “Erbium(III) doped polyurethaneureas: Novel broadband ultraviolet-to-visible converters”

H. Cankaya, R. Kilci, A. Sennaroglu, E. Yilgor and I. Yilgor

J. Appl. Polym. Sci., 117, 378-383 (2010)

74. “Antibacterial Silicone-urea/Montmorrilonite Nanocomposites”

E. Yilgor, I. I. Nugay, M. Bakan and I. Yilgor

Silicon, 1(3), 183-190 (2009)

73. “PIB-pased polyurethanes. IV. The morphology of polyurethanes containing soft

co-segments”

Jungmee Kang, Gabor Erdodi, Joseph P. Kennedy, Emel Yilgor and Iskender Yilgor

J. Polymer Sci., Polymer Chemistry, 47(22), 6180-6190 (2009)

72. “Polyisobutylene-based polyurethanes. III. Polyurethanes containing PIB/PTMO soft co-segments”

Gabor Erdodi, Jungmee Kang, Joseph P. Kennedy, Emel Yilgor and Iskender Yilgor

J. Polymer Sci., Polymer Chemistry, 47(20), 5278-5290 (2009)

71. “Realtime Mechano-Optical Study On Deformation Behavior Of PTMO/CHDI Based

Polyetherurethanes Under Uniaxial Extension”

Emre Unsal, Baris Yalcin, Iskender Yilgor, Emel Yilgor, Mukerrem Cakmak

Polymer, 50(19), 4644-4655 (2009)

70. “Contribution of soft segment entanglement on the tensile properties of silicone-urea copolymers with low hard segment contents”

Iskender Yilgor, Tugba Eynur, Emel Yilgor and Garth L. Wilkes

Polymer, 50(19), 4432-4437 (2009).

69. “Polyisobutylene-Based Polyurethanes. II. Polyureas Containing Mixed PIB/PTMO Soft Segments”

Suresh K. Jewrajka, Jungmee Kang, Gabor Erdodi, Joseph P. Kennedy, Emel Yilgor and Iskender Yilgor

J. Polymer Sci., Polymer Chemistry, 47(11), 2787-2797 (2009)

68.       “Time dependent morphology development in segmented polyetherurea copolymers based on aromatic diisocyanates”,
            I. Yilgor, E. Yilgor, S. Das and G. L. Wilkes
            J. Polymer Sci., Polymer Physics, 47(5), 471-483 (2009).

67.       “Polyisobutylene-Based Segmented Copolymers. 1. Synthesis of Hydrolytically and Oxidatively Stable Polyureas”
            Suresh K. Jewrajka, Emel Yilgor, Iskender Yilgor and Joseph P. Kennedy,
            J. Polymer Sci., Polymer Chemistry, 47(1), 38-48 (2009).

66.       “Informal undergraduate polymer research program at Koc University Chemistry Department”
            I. Yilgor and E. Yilgor
            Polymer Reviews, 48(4), 633-641 (2008)

65.       “Influence of polymerization procedure on polymer topology and other structural properties in highly branched polymers obtained by A2+B3 approach”
            C. Oguz, M. A. Gallivan, S. Cakir, E. Yilgor and I. Yilgor
            Polymer, 49(5), 1414-1424 (2008)

64.       “Probing the urea hard domain connectivity in segmented, non-chain extended polyureas using hydrogen-bond screening agents”
            Sudipto Das, Iskender Yilgor, Emel Yilgor, Garth L. Wilkes
            Polymer, 49(1), 174-179 (2008)

63.       “Structure-morphology-property behavior of segmented thermoplastic polyurethanes and polyureas prepared without chain extenders”
            I. Yilgor and E. Yilgor
            Polymer Reviews, 47(4), 487-510 (2007)

62. “Effect of Symmetry and H-bond Strength of Hard Segments on the Structure-Property Relationships of Segmented, Non-Chain Extended

Polyurethanes and Polyureas”
Sudipto Das, Derek B. Klinedinst, Iskender Yilgor, Emel Yilgor, Frederick L. Beyer, David F. Cox, Garth L. Wilkes

J. Macromol. Sci., Part B: Phys., 46(5), 853-875 (2007)

61.       “Structure-property relationships and melt rheology of segmented, non-chain extended polyureas: Effect of soft segment molecular weight”
            Sudipto Das, Iskender Yilgor, Emel Yilgor, Bora Inci, Ozgul Tezgel, Frederick L. Beyer, Garth L. Wilkes
            Polymer, 48(1), 290-301 (2007)

60.       “FTIR Investigation of the Influence of Diisocyanate Symmetry on the Morphology Development in Model Segmented Polyurethanes”
            Iskender Yilgor, Emel Yilgor, I. Guclu Guler, Thomas C. Ward and Garth L. Wilkes
            Polymer, 47(11), 4105-4114 (2006)

59.       “Highly Branched Poly(arylene ether)s via Oligomeric A2+B3 strategies”
            Qin Lin, Serkan Unal, Ann R. Fornof, Iskender Yilgor and Timothy E. Long
            Macromolecular Chemistry and Physics, 207(6), 576-586 (2006)

58.       “Anomalous Dilute Solution Properties of Segmented Polydimethylsiloxane-Polyurea Copolymers in Isopropyl Alcohol”
            Iskender Yilgor, Thomas C. Ward, Emel Yilgor and G. Ekin Attila
            Polymer, 47(4), 1179-1186 (2006)

57.       “Luminescent Nd3+ doped silicone-urea copolymers”
            Umit Demirbas, Adnan Kurt, Alphan Sennaroglu, Emel Yilgor and Iskender Yilgor
            Polymer, 47(4), 982-990 (2006)

56.       "Structure–property behavior of new segmented polyurethanes and polyureas without use of chain extenders”
            D. B. Klinedinst, J. P. Sheth, E. Yilgör, I. Yilgör, F. L. Beyer and G. L. Wilkes
            J. Rubber Chemistry and Technology, 78(5), 737-753 (2005)

55.       “Time-dependent morphology development in a segmented polyurethane with monodisperse hard segments based on 1,4-phenylene diisocyanate”
            J. P. Sheth, D. B. Klinedinst, T. W. Pechar, G. L. Wilkes, E. Yilgor and I. Yilgor
            Macromolecules, 38(24), 10074-10079 (2005)

54.       “Structure-property behavior of segmented polyurethaneurea copolymers based on an ethylene-butylene soft segment”
            Derek B. Klinedinst, Emel Yilgör, Iskender Yilgör, Frederick L. Beyer and Garth L. Wilkes
            Polymer, 46(23), 10191-10201 (2005)

53.       “A comparative study of the structure-property behavior of highly branched segmented poly(urethane urea) copolymers and their linear analogs”
            Jignesh P. Sheth, Serkan Unal, Emel Yilgor, Iskender Yilgor, Frederick L. Beyer, Timothy E. Long and Garth L. Wilkes
            Polymer, 46(23), 10180-10190 (2005)

52.       “Structure-property behavior of poly(dimethylsiloxane) based segmented polyurea copolymers modified with poly(propylene oxide)”
            Jignesh P. Sheth, Emel Yilgor, Burcin Erenturk, Hayriye Ozhalici, Iskender Yilgor and Garth L. Wilkes
            Polymer, 46(19), 8185-8193 (2005)

51.       “Role of chain symmetry and hydrogen bonding in segmented copolymers with monodisperse hard segments”
            J. P. Sheth, Derek B. Klinedinst, Garth L Wilkes, Iskender Yilgor and Emel Yilgor
            Polymer, 46(18), 7317-7322 (2005)

50.       “Probing the hard segment phase connectivity and percolation in model segmented polyurethaneurea copolymers”
            J. P. Sheth, A. Fornof, T. E. Long, I. Yilgor, and G. L. Wilkes
            Macromolecules, 38(13), 5681-5685 (2005)

49. “Understanding the structure development in hyperbranched polymers prepared by oligomeric A2+B3 approach: Comparison of experimental results

            and simulations”
            S. Unal, C. Oguz, E. Yilgor, M. Gallivan, T. E. Long and I. Yilgor
            Polymer, 46(13), 4533-4543 (2005)

48.       “Electrospinning of linear and highly branched segmented poly(urethane urea)s”
            M. G. McKee, T. Park, S. Unal, I. Yilgor and T. E. Long
            Polymer, 46(7), 2011-2015 (2005)

47.       “Influence of annealing on the performance of short glass fiber reinforced polyphenylene sulfide (PPS) composites”
            A. Arıcı, T. Sınmazçelik, L. Çapan, I. Yilgor and E. Yilgor
            J. Composite Materials, 39(1), 21-33 (2005)

46.       “Rheology and Processing of BaSO4 Filled Medical-Grade Thermoplastic Polyurethane”
            G. Lu, D. M. Kalyon, I. Yilgor and E. Yilgor
            Polym. Eng. Sci., 44(10), 1941-1948 (2004)

45.       “Effect of chemical composition on large deformation mechano-optical properties of high strength thermoplastic polyurethaneureas”
            S. Curgul, I. Yilgor, E. Yilgor, B. Erman and M. Cakmak
            Macromolecules, 37(23), 8676-8685 (2004)

44.       “A new generation of highly branched polymers: Hyperbranched, segmented polyurethaneurea elastomers”
            S. Unal, I. Yilgor, E. Yilgor, J. P. Sheth, G. L. Wilkes and T. E. Long
            Macromolecules, 37(19), 7081-7083 (2004)

43. “Influence of system variables on the morphological and dynamic mechanical behavior of polydimethylsiloxane based segmented polyurethane and

            polyurea copolymers: A comparative perspective”
            J. P. Sheth, A. Aneja, G. L. Wilkes, E. Yilgor, G. E. Atilla, I. Yilgor and F. L. Beyer
            Polymer, 45(20), 6919-6932 (2004)

42.       “Preparation of poly(ether-urea) copolymers in isopropanol. In-situ FTIR studies and polymer synthesis”
            Iskender Yilgor, Brian Mather, Serkan Unal, Emel Yilgor, and Timothy E. Long
            Polymer, 45(17), 5829-5836 (2004)

41.       “Rheology and Extrusion of a Medical-Grade Thermoplastic Polyurethane”,
            G. Lu, D. M. Kalyon, I. Yilgor and E. Yilgor
            Polym. Eng. Sci., 43(12), 1863-1877 (2003)

40.       “Isopropyl alcohol: An unusual, powerful, “green” solvent for the preparation of silicone-urea copolymers with high urea contents”
            E. Yilgor, G. E. Atilla, A. Ekin, P. Kurt and I. Yilgor
            Polymer, 44(26), 7787-7793 (2003)

39.       “Exploring Urea Phase Connectivity in Molded Flexible Polyurethane Foam Formulations Using LiBr as a Probe”
            A. Aneja, G. L. Wilkes, I. Yilgor, E. Yilgor and E. Yurtsever
            J. Macromol. Sci. Part B-Physics, B42(6), 1125-1139 (2003)

38.       “Surface properties of polyamides modified with reactive polydimethylsiloxane oligomers and copolymers”
            E. Yilgor, I. Yilgor and S. Suzer
            Polymer, 44(24), 7271-7279 (2003)

37.       “Influence of Lithium Chloride on the Morphology of Flexible Slabstock Polyurethane Foams and Their Plaque Counterparts”
            A. Aneja, G. L. Wilkes, E. Yurtsever and I. Yilgör
            Polymer, 44(3), 757-768 (2003)

36.       “Conformational Analysis of Model Poly(ether urethane) Chains in the Unperturbed State and Under External Forces”
             I. Yilgör, E. Yurtsever and B. Erman
             Macromolecules, 35(26), 9825-9831 (2002)

35. “Hydrogen bonding and polyurethane morphology II. Spectroscopic, thermal and crystallization behavior of polyether blends with 1,3-dimethylurea

            and a model urethane compound”
            E. Yilgör, E. Yurtsever and I. Yilgör
            Polymer, 43(24), 6561-6568 (2002)

34. “Hydrogen bonding and polyurethane morphology I. Quantum mechanical calculations of hydrogen bond energies and vibrational spectroscopy of

            model compounds”
            E. Yilgör, I. Yilgör and E. Yurtsever
            Polymer, 43(24), 6551-6559 (2002)

33.       “Electrospinning of Polyurethane Fibers”
            M. M. Demir, I. Yilgör, E. Yilgör and B. Erman
            Polymer, 43(11), 3303-3309 (2002)

32. “Modification of polyolefins with silicone copolymers. II. Thermal, mechanical and Tribological behavior of PP and HDPE blended with silicone

            copolymers”
            Emel Yilgor, Tamer Sinmazcelik and Iskender Yilgor
            J. Appl. Polym. Sci., 84(3), 535-540 (2002)

31. “Modification of polyolefins with silicone copolymers. I. Processing behavior and surface characterization of PP and HDPE blended with silicone

            copolymers”
            Iskender Yilgor, Emel Yilgor and Sefik Suzer
            J. Appl. Polym. Sci., 83(8), 1625-1634 (2002)

30.       “Hydrogen Bonding: A Critical Parameter in Designing Silicone Copolymers”
            Emel Yilgor and Iskender Yilgor
            Polymer, 42(19), 7953-7959 (2001)

29.       "Comparison of Hydrogen Bonding in Polydimethylsiloxane and Polyether Based Urethane and Urea Copolymers"
             E. Yilgor, E. Burgaz, E. Yurtsever and I. Yilgor
             Polymer, 41(3), 849-857 (2000)

28.       "Catalyst effect on the transesterification reaction between polycarbonate and polycaprolactone-b-polydimethylsiloxane triblock copolymers"
            D. Ardal, E. Yilgor and I. Yilgor
            Polymer Bulletin, 43, 207-214 (1999)

27.       "Hydrophilic Polyurethaneurea Membranes: Influence of Chemical Composition on the Water Vapor Permeation Rates"
            I. Yılgör and E. Yılgör
            Polymer, 40(20), 5575-5581 (1999)

26.       "Thermal Stabilities of End-Groups in Hydroxyalkyl Terminated Polydimethylsiloxane Oligomers"
            I. Yilgor and E. Yilgor
            Polym. Bull., 40, 525-532 (1998)

25.       "1,3-Bis(g-aminopropyl)tetramethyldisiloxane Modified Epoxy Resins: Curing and Characterization"
            E. Yilgör and I. Yilgör
            Polymer, 39, 1691-1695 (1998)

24.      "Surface Depletion of End Groups in Amine-Terminated Poly(dimethylsiloxane)"
            C. J. Jalbert, J. T. Koberstein, R. Balaji, Q. Bhatia, L. Salvati, Jr., and I. Yilgor
            Macromolecules, 27(9), 2409-2413 (1994)

23.      "Silicone Surfactants. Part V: Siloxane Copolymers as Surface Modifying Additives for Polymers"
            I. Yilgor, E. Yilgor and B. Gruning
            Tenside Surf. Det., 30(3), 158-164 (1993)

22.       "Molecular Weight Dependence and End-Group Effects on the Surface Tension of Poly(dimethylsiloxane)"
            C. Jalbert, J. T. Koberstein, I. Yilgor, P. Gallager and V. Krukonis
            Macromolecules, 26(12), 3069-3074 (1993)

21. "Chemical Modification of Matrix Resin Networks with Engineering Thermoplastics: I. Synthesis, Morphology, Physical Behavior and Toughening

            Mechanisms of Poly(arylene ether sulphone) modified Epoxy Networks"
            J. L. Hedrick, I. Yilgor, M. Jurek, J. C. Hedrick, G. L. Wilkes and J. E. McGrath,
            Polymer, 32, 2020-2032 (1991)

20.       "Isocyanate-Epoxy Reactions in Bulk and Solution"
            J. S. Senger, I. Yilgor, J. E. McGrath and R. A. Patsiga
            J. Appl. Polym. Sci., 38, 373-382 (1989)

19.       "Novel Triblock Siloxane Copolymers: Synthesis, Characterization and Their Use as Surface Modifying Additives"
            I. Yilgor, W. P. Steckle, Jr., E. Yilgor, R. G. Freelin and J. S. Riffle
            J. Polym. Sci., Part-A: Polym. Chem., 27, 3673-3690 (1989)

18.       "Polysiloxane Containing Copolymers: A Survey of Recent Developments"
            I. Yilgor and J. E. McGrath
            Advances in Polymer Science, Vol. 86, 1-87 (1988)

17.       "The Synthesis and Characterization of Poly(Dimethylsiloxane) Based Liquid Crystals"
            R. C. Allen, G. L. Wilkes, I. Yilgor, D. Wu and J. E. McGrath
            Makromol. Chem., 187, 2909-2931 (1986)

16.       "Effect of Catalysts on the Reaction Between a Cycloaliphatic Diisocyanate (H-MDI) and n-Butanol"
            I. Yilgor and J. E. McGrath
            J. Appl. Polym. Sci., 30, 1733-1739 (1985)

15.       "Polymeric Peroxycarbamates: Synthesis, Characterization and Their Initiation of Styrene Polymerization"
            I. Yilgor and B. M. Baysal
            Makromol. Chem., 186, 463-472 (1985)

14. "Chemical Modification of Matrix Resin Networks with Engineering Thermoplastics. I. Phenolic Hydroxyl Terminated Poly(Aryl Ether Sulfone)-Epoxy

            Systems"
            J. L. Hedrick, I. Yilgor, G. L. Wilkes and J. E. McGrath
            Polym. Bull., 13(3), 201-208 (1985)

13. "Novel Supercritical Fluid Techniques for Polymer Fractionation an Purification. II. Fractionation and Characterization of Functional Siloxane

            Oligomers"
            I. Yilgor, J. E. McGrath and V. J. Krukonis
            Polym. Bull., 12, 499-506 (1984)

12.       "Novel Supercritical Fluid Techniques for Polymer Fractionation and Purification. I. Background"
            I. Yilgor, J. E. McGrath and V. Krukonis
            Polym. Bull., 12, 491-497 (1984)

11.       "Segmented Organosiloxane Copolymers. 2. Thermal and Mechanical Properties of Siloxane-Urea Copolymers"
            D. Tyagi, I. Yilgor, J. E. McGrath and G. L. Wilkes
            Polymer, 25(12), 1807-1816 (1984)

10.       "Segmented Organosiloxane Copolymers. I. Synthesis of Siloxane-Urea Copolymers"
            I. Yilgor, A. K. Sha'aban, W. P. Steckle, Jr., D. Tyagi, G. L. Wilkes and J. E. McGrath
            Polymer, 25(12), 1800-1806 (1984)

9. "Synthesis and Characterization of Sulfonated Poly(Arylene Ether Sulfones)"
B. C. Johnson, I. Yilgor, C. Tran, M. Iqbal, J. P. Wightman, D. R. Lloyd and J. E. McGrath

J. Polym. Sci., Polym. Chem., 22(3), 721-737 (1984)

8.         "Synthesis of High Molecular Weight Polyester-Carbonates via Interfacial Phosgenation of Aromatic Dicarboxylic Acids and Biphenols"
            F. L. Keohan, R. G. Freelin, J. S. Riffle, I. Yilgor and J. E. McGrath
            J. Polym. Sci., Polym. Chem., 22(3), 679-704 (1984)

7.         "Synthesis and Characterization of Free-Radical Cured Bismethacryloxy Bisphenol-A Epoxy Networks"
            I. Yilgor, E. Yilgor, A. K. Banthia, G. L. Wilkes and J. E. McGrath
            Polym. Composites, 4(2), 120-125 (1983)

6.         "Siloxane-Urea Segmented Copolymers: II. Investigation of Mechanical Behavior"
            D. Tyagi, G. L. Wilkes, I. Yilgor and J. E. McGrath
            Polym. Bull., 8, 543-550 (1982)

5.         "Siloxane-Urea Segmented Copolymers: I. Synthesis and Characterization of Model Polymers from MDI and Bis(Aminopropyl)Polydimethylsiloxane"
            I. Yilgor, J. S. Riffle, G. L. Wilkes and J. E. McGrath
            Polym. Bull., 8, 535-542 (1982)

4.         "A DSC Kinetic Study of Epoxy Network System Bisphenol A Diglycidylether-Bis(4-aminocyclohexyl)methane"
            I. Yilgor, E. Yilgor, A. K. Banthia, G. L. Wilkes and J. E. McGrath
            Polym. Bull., 4(6), 323-327 (1981)

3.         "Kinetics of the Reaction of a Glycol with a Diisocyanate"
            I. Yilgor, E. H. Orhan and B. M. Baysal
            Makromol. Chem., 179, 109-112 (1978)

2.         Block Copolymers from Poly(ethylene oxide) and Styrene"
            E. H. Orhan, I. Yilgor and B. M. Baysal
            Polymer, 18, 286-290 (1977)

1.         "Preparation of Block Copolymers by Use of Some New Polymeric Peroxides and Characterization of the Products"
            B. M. Baysal, E. H. Orhan and I. Yilgor
            J. Polym. Sci., Symp. No. 46, 237-249 (1974)